418 8th Street SE Unit A-2 Loveland CO 80537 US

+1.9702928207

H-PD-2 Data Sheet - Click Here

H-PD-2 Heater Power Detector with IP65 Enclosure
H-PD-2 Heater Power Detector with CT

The solution to this problem is the HPD-2 Heater Power Detector from EDE Electric Motor Testing. This simple DIN rail mountable device will supply early warning that motor heaters are non-operational or have not been turned on. It's standard packaging is in a ingress protection IP65 enclosure with a translucent cover for easy viewing of the status indicator lights. 


Don't fall prey to this ever to present scenario. You turn off your motors for an outage or general maintenance and leave them off for a week or two or maybe longer? When you turn them back on, they fail to ground due to moisture build up because the motor heaters failed to come on? Now a little maintenance turns into a lot of repair. At EDE we have the easy and cost effective solution to avoid this scenario. 

Benefits of Use

H-PD-2 Heater Power Detector Industrial Installation
H-PD-2 Heater Power Detector Industrial Installation

The H-PD-2 Heater Power Detector consists of several components.


  • DIN rail mountable H-PD-2 unit
  • Appropriate Split Core Current Transformer for each unit
  • IP65 or better ingress protected enclosure


-Early warning of electric space motor heaters improper function


-Monitor motors if they trip off or have been forgotten for any length of time - both in stores and in service


-Easily seen green or red LEDs alert maintenance staff to motor status


-Easily installed DIN rail system


-IP65 or better enclosures available


-Self powered - harvest energy from heater circuit for its operation


-Split core CT for easy installation - No need to lift wires

-dd

Type your paragraph here.

Modern Solution for an Ongoing Problem

HPD-2 Heater Power Detector

H-PD-2 Heater Power Detector Kit
EDE Electric Motor Testing

Intended Use


  • Monitoring of the alternating current electric motor space heaters between 1A-10A
  • Monitor other constant current circuits for activity
  • Early notification of electric motor heater status
  • One, two, or even eight or more separate electric heaters can be monitored in one large electric motor
  • 1 x signal output for remote monitoring


Strip or space motor heaters are specified to provide effective heating of the interior spaces of interior spaces of electric motors and other machines. One primary reason they are present is to provide a measure of defense against the deleterious effects of water contamination or penetration on the electric coils and

elements of the motor or electric insulation systems.

When they work properly, operators are rewarded with

the performance they expect out of their motors. Installed

deep inside the motor...out of sight might mean ... out of

mind, their hidden utility may be forgotten, or not

understood.


When heaters are forgotten or ignored and/or not energized at the

proper times, condensing moisture can lead to sometimes irreversible

damage to hidden interior components of motors. Very costly,

unanticipated problems can result. 


Therefore, a need exists for a simple, minimally invasive, effective and

easy to understand "early warning" method for alerting maintenance

professionals about proper operation of their electric motor space

heaters.