Identify Possible Motor Abuse or Misapplication
Schedule maintenance according to length of run time instead of on a monthly, quarterly, or even annual basis. Prioritize motors by duty cycle during outage times to better share work requirements. For example - did that motor really run 200 hours or 2,000 hours?
The SST-50 Start/Stop Motor Timer consists of the following components:
In processes where there are more than one motor involved, it is easy to lose track of which motor id doing the majority of the work. Understand quickly the role each motor in the process carries.
-Magnetically attached to side of motor or U-Bolt to conduit/base
-No hook up required, triggers off of stray flux
-25 year data retention
-Zero reset switch for time and starts
-IP67 Ingres Enclosure
-Auxiliary input use in low flux situations
-Solar Charge capable
-Rechargeable battery pack through USB wall wart or Aux
Benefits of Use
Intended Use: Understand the duty cycle of motors in your facility.
More Accurately Schedule Maintenance
Type your paragraph here.
-Schedule maintenance activities
-Identify possible abuses
-Remaining usable life estimates
-Know which shared process motors are doing most of the work
-Monitor starts/stops and run time on problem motors
-Troubleshooting - just when did that motor trip?
-Super Easy installation - just magnetically attach to outside of motor
The SST-50 Start Stop Timer is a rechargeable batter enclosed unit that magnetically attaches to the outside of the motor case and counts each start. It records run time in six (6) minute intervals (1/10 of an hour). This display gives the maintenance procession knowledge on duty cycle that motors are operating within.
Monitor energy usage for projects by run time hours. Examples include irrigation pumps, just how long did that pump run?
Energy use Observation
It is now possible to track motors through the stray flux to
confirm potential process problems. If an electric motor is
designed to be started and stopped once a day
and it is actually being started 10, 20 or even 100 times a day,
there is going to be a maintenance problem in the future. With
the SST-50 Start/Stop/Timer identify potential process abuse
before problems develop.